Rugby Architectural Building Products is a division of ADENTRA.
© 2024 Rugby. Architectural Building Products. All rights reserved.
L823(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L807(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L770(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L769(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L768(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L768(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L767(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L765(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L764(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L764(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L763(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L763(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L762(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L762(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L761(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L760(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L666(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L571(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L570(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L568(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L566(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L565(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L564(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L563(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L562(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L561(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L557(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L556(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L555(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L552(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L550(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L546(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L545(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L544(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L543(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L542(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L541(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L540(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L538(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L537(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L535(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L533(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L532(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L530(A)
Texture: Alto
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L521 (C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L502(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L499(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L498(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L497(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L496(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L495(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L494(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L493(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L492(U)
Texture: Urbania
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L491(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L489(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L488(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L487(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L483(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L481(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L480(S)
Texture: Smoothwood
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L479(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L478(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L477(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L476(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L475(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L474(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L473(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L472(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L469(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L458(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L449(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L444(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L443(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L421(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L420(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L303(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L258(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L228(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L228(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L204(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L203(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L203(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L202(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L201(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L191(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L178(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L175(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L105(I)
Texture: Isola
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L105(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L100(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
L080(C)
Texture: Crystalite
Sizes: 4′ x 8′ to 5′ x 12′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 73” to 145” (1854 mm to 3683 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2015(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2014(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2013(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2011(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2010(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2007(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2006(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2005(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2004(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2003(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2002(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2001(Y)
Texture: VIVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2056(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2055(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2054(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2053(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2052(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2051(F)
Texture: FERIA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2041(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2035(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2034(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2033(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2032(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
M2031(B)
Texture: BRAVA
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.